Qingdao Beishun Environmental Protection Technology Co.,Ltd
Companies adhere to the "first-class quality to gain market confidence, quality service to win customer satisfaction, continuous improvement of enterprise development seek to establish a corporate
Add to Cart
Your two points, "Energy Saving" and "Precise Temperature Control," are fundamental to the performance and efficiency of this industrial machinery.
This is a major selling point for modern vulcanizing presses, achieved through several engineering innovations:
Efficient Heating Systems: Traditional presses might use older, resistive heating elements that are slow and inefficient. Modern presses often utilize:
Induction Heating: Heats the platens directly and rapidly using electromagnetic fields, minimizing heat loss.
Thermal Oil Systems: Circulates heated oil through channels in the platens, providing even heat distribution and allowing for heat recovery.
Advanced Insulation: The massive steel platens and the press frame are heavily insulated to prevent thermal energy from escaping into the factory environment. This reduces the energy required to maintain the target temperature.
Optimized Cycle Times: Precise control systems allow for faster heating and cooling cycles, meaning the press is not consuming energy for longer than necessary.
Automatic Standby Modes: The press can automatically enter a low-power standby mode when not in active production, further reducing idle energy consumption.
Benefit: Lower operating costs, reduced environmental impact, and compliance with modern energy efficiency standards.
This is critical for product quality and consistency during the vulcanization process.
Uniform Heat Distribution: The "frame plate" design is inherently rigid, ensuring that the heated platens remain parallel under high pressure. This prevents "hot spots" or "cold spots" across the product, leading to a uniform cure.
Advanced PLC (Programmable Logic Controller): The brain of the press. It uses input from multiple high-accuracy thermocouples embedded in the platens to constantly monitor and adjust the heating elements. It can maintain temperature within a very tight tolerance (e.g., ±1°C).
Multi-Zone Temperature Control: For large presses, the platen can be divided into several independent heating zones. Each zone is controlled separately to compensate for any natural heat loss at the edges, guaranteeing perfect temperature uniformity across the entire pressing surface.
Benefit: Consistent product quality, elimination of under-cured or over-cured rejects, improved physical properties of the final product (like tensile strength and elasticity), and repeatability from batch to batch.
Technical parameters
| Item | 800 | 1200 | 1500 | 1700 | 2000 | 2600 |
| Inner diameter(mm) | 800 | 1200 | 1500 | 1700 | 2000 | 2600 |
| Canister length(mm) | 22000 | 3000 | 3000 | 4000 | 5000 | 10000 |
| Number of lid sawtooth | 12 | 12 | 14 | 14 | 16 | 24 |
| thickness of lid (mm) | 10 | 10 | 10 | 10 | 16 | 14 |
| Thickness of the tank body(mm) | 10 | 10 | 10 | 10 | 12 | 14 |
| Working pressure(Mpa) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.55 |
| Dimensions(mm) (length*width*height) |
22766*1445 *1170 |
4010*1575 *1670 |
3960*2150 *2050 |
4925*2162 *2070 |
6200*2590 *2424 |
11722*3360 *4136 |
| Weight(Kg) | 5580 | 2017 | 2950 | 3835 | 6500 | 16775 |
To complete the picture, here are other important characteristics that complement your points:
High-Strength Frame: The rigid frame (often a four-column or C-frame design) is built to withstand immense clamping forces (often hundreds or thousands of tons) without flexing. This ensures consistent pressure application across the entire mold, which is essential for part dimensional accuracy and density.
Precise Pressure Control: Similar to temperature, the hydraulic system applies and maintains pressure with high accuracy. This is crucial for compressing the rubber compound to eliminate voids and achieve the desired shape and material properties.
Automation and Ease of Use: Modern presses feature touch-screen HMIs (Human-Machine Interfaces) for easy programming of curing recipes (time, temperature, pressure). Automated mold height adjustment and robotic part handling are common for high-volume production.
Durability and Low Maintenance: Constructed from high-quality steel and with robust hydraulic components, these presses are built for 24/7 operation in demanding industrial environments.
In essence, a high-strength frame plate vulcanizing press is a sophisticated piece of equipment that combines a robust mechanical structure with advanced thermal and hydraulic control systems. The energy-saving features reduce operational costs, while the precise temperature control guarantees the high quality and consistency of the vulcanized products, making it a vital asset in industries like tire manufacturing, automotive seals, conveyor belts, and technical rubber goods.