Qingdao Beishun Environmental Protection Technology Co.,Ltd
Companies adhere to the "first-class quality to gain market confidence, quality service to win customer satisfaction, continuous improvement of enterprise development seek to establish a corporate
Add to Cart
Fully Automatic Electric Heating Rubber Double Vulcanizing Machine/Rubber Molding Machine
Flat vulcanizer, also called hot press molding machine, is a good helper for rubber and plastic industry. It is mainly used for mixing and processing of chemical raw materials such as polymers such as rubber and masterbatch and batching test to ensure that the color and quality meet the requirements. Before mass production in the factory, it can also provide the basis for batching.
Equipment Features
Product Model: XLP-400
Heater: Built-in electric heating mold dedicated heater, high power, fast heat conduction and long life.
Temperature sensing rod: adopts screw-in structure, sensitive temperature measurement, fast heat sensing and high precision.
Heating plate: high temperature resistant high-quality alloy (electric heating high temperature mold steel) is selected, with high hardness, no deformation, fast heat conduction and corrosion resistance.
Pressure system: imported hydraulic cylinder and pressure control system, stable pressure and no noise.
Scope of application
The flat vulcanizer is suitable for various processing needs of rubber and plastic industry. Put the plastic or rubber raw material into the mold, clamp it between the upper and lower electric heating plates, and apply pressure under the intelligent constant temperature of the electric heating plate to form the raw material.
In general, the flat vulcanizing machine is an efficient and precise equipment that can meet the needs of various rubber and plastic processing, ensuring that the quality and color of the product meet the standards. Whether in the laboratory or the factory, it is your right-hand man.
Technical Parameters:
| Parameter Type | XLB240× 240×2 | XLB350× 350×2 | XLB400× 400×2 | XLB500× 500×2 | XLB600× 600×2/4 | XLB700 ×700×2 | XLB750 ×850×2/4 | XLB900 ×900×2Q |
| Total Pressure (MN) | 0.15 | 0.25 | 0.5 | 0.63 | 1.00 | 1.20 | 1.60 | 2.00 |
| Plate Distance (mm) | 125 | 125 | 125 | 125 | 125 | 125 | 200 | 300 |
| Working Layer NO. | 2 | 2 | 2 | 2 | 2-4 | 2 | 2-4 | 2 |
| Unit Area Pressure of Hot Plate(Mpa) | 2.60 | 2.04 | 3.13 | 2.52 | 2.77 | 2.45 | 2.51 | 2.47 |
| Plunger Stroke (mm) | 250 | 250 | 250 | 250 | 250/400 | 250 | 400 | 400 |
| Heating Mode | Electricity | Electricity | Electricity/ Stream | Electricity/ Stream | Electricity/ Stream | Stream | Electricity/ Stream | Stream |
| Motor Power (KW) | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 5.5 |
| Size:(L×W×H)(mm) | 1200×350 ×1300 | 1400×480 ×1380 | 1600×500 ×1480 | 1750×600 ×1540 | 1880×720 ×1680 | 2000×850 ×1750 | 2250×1200 ×2200 | 1400×900 ×2400 (Mainframe) |
Working process of plate vulcanizer
1 Heating stage: Use electric heating or other heating methods to heat the upper and lower heating plates to the preset vulcanization temperature.
2. Pressurization stage: Place the rubber or plastic product to be vulcanized between the two heating plates, and apply pressure through the hydraulic system or mechanical system to ensure that the product is subjected to uniform pressure.
3. Vulcanization stage: Under the combined action of high temperature and pressure, the molecules in the rubber or plastic undergo cross-linking reactions to complete the vulcanization process. The vulcanization time is set according to the material properties and process requirements.
4. Cooling stage: After the vulcanization is completed, stop heating and may cool down to reduce the product temperature for easy removal.
5. Demolding stage: Open the plate and take out the vulcanized product.
Summary: The plate vulcanizer provides appropriate temperature, pressure and time to make the rubber or plastic products achieve the desired performance and shape.
